' $Id: joostvb.ini 1231 2007-08-22 10:07:07Z joostvb $ , in cvs at
' $URL: svn+ssh://agate.conuropsis.org/home/users/joostvb/srv/svn/www.mdcc.cx/trunk/mdcc.cx/xs4all/joostvb.ini $
'
' _nog_ mooier is denk ik sipspoof.ini, zie http://jp.dhs.org/~jp/510.html
' Tnx Fruit voor deze tip
'

[ env.ini ]
set var=CONF_REGION value="Netherlands"
set var=CONF_PROVIDER value="ADSL van KPN Telecom/XS4ALL"
set var=CONF_DESCRIPTION value="Geen DHCP, geen firewalling, geen DNS, PPTP op PC. Met dank aan Fruit."
set var=CONF_SERVICE value="SpeedTouch Modem met alleen PPTP"
set var=CONF_DATE value="2003-08-22"
set var=CONF_VERSION value="1.1"
set var=HOST_SETUP value="auto"

'setting of env variables for use without wizard
'-----------------------------------------------
set var=DSL_ADDR value="8*48"
set var=%passwrd value=""

'Definition of groups
'--------------------
'Definition of password group
def var=passwdgrp type=grp desc="Je kunt hier optioneel je modem beveiligen met een gebruikersnaam en wachtwoord." alias="Authenticatie beheerder"

'password group
'--------------
'variable userid
def var=userid type=string grp=passwdgrp alias="Username" desc="Tik een gebruikersnaam in."
'variable passwrd
def var=%passwrd type=passw grp=passwdgrp alias="Password" desc="Tik een wachtwoord in."

[ phone.ini ]
add name=pc1 addr=$DSL_ADDR type=pppoa

[ qos.ini ]
add name=default class=ubr tx_peakrate=0

[ bridge.ini ]
config age=300

[ brfilter.ini ]

[ pptp.ini ]
profadd name=pc1

[ dhcp.ini ]

[ mer.ini ]

[ ppp.ini ]

[ cip.ini ]

[ nat.ini ]

[ pfilter.ini ]

[ pfirewall.ini ]

[ ip.ini ]
config forwarding=on firewalling=on redirects=on sourcerouting=off netbroadcasts=off ttl=64 fraglimit=64 defragmode=nat addrcheck=static mssclamping=on
apadd addr=172.16.0.2/24 intf=eth0 addroute=yes type=1
ifconfig intf=loop mtu=1500 group=local
ifconfig intf=eth0 mtu=1500 group=lan
rtadd dst=0.0.0.0/0 gateway=172.16.0.1 metric=70
rtadd dst=224.0.0.0/4 intf=eth0
rtadd dst=255.255.255.255/32 intf=eth0

[ autoip.ini ]

[ eth.ini ]
ifconfig intf=0 type=auto

[ dnsd.ini ]

[ dhcc.ini ]
config trace=off

[ adslpots.ini ]
config opermode=multimode maxbitspertoneUS=13

[ adslisdn.ini ]
config opermode=multimode maxbitspertoneUS=13

[ system.ini ]
config upnp=enabled mdap=enabled dcache=enabled
setpassword password=$%passwrd

[ endofarch ]