# Makefile.in generated by automake 1.9.6 from Makefile.am.
# Makefile.  Generated from Makefile.in by configure.

# Copyright (C) 1994, 1995, 1996, 1997, 1998, 1999, 2000, 2001, 2002,
# 2003, 2004, 2005  Free Software Foundation, Inc.
# This Makefile.in is free software; the Free Software Foundation
# gives unlimited permission to copy and/or distribute it,
# with or without modifications, as long as this notice is preserved.

# This program is distributed in the hope that it will be useful,
# but WITHOUT ANY WARRANTY, to the extent permitted by law; without
# even the implied warranty of MERCHANTABILITY or FITNESS FOR A
# PARTICULAR PURPOSE.



# $Id: Makefile.am,v 1.22 2005/08/22 20:54:21 joostvb Exp $

srcdir = .
top_srcdir = .

pkgdatadir = $(datadir)/autobook
pkglibdir = $(libdir)/autobook
pkgincludedir = $(includedir)/autobook
top_builddir = .
am__cd = CDPATH="$${ZSH_VERSION+.}$(PATH_SEPARATOR)" && cd
INSTALL = /usr/bin/install -c
install_sh_DATA = $(install_sh) -c -m 644
install_sh_PROGRAM = $(install_sh) -c
install_sh_SCRIPT = $(install_sh) -c
INSTALL_HEADER = $(INSTALL_DATA)
transform = $(program_transform_name)
NORMAL_INSTALL = :
PRE_INSTALL = :
POST_INSTALL = :
NORMAL_UNINSTALL = :
PRE_UNINSTALL = :
POST_UNINSTALL = :
subdir = .
DIST_COMMON = README $(am__configure_deps) $(autobook_TEXINFOS) \
	$(srcdir)/Makefile.am $(srcdir)/Makefile.in \
	$(srcdir)/stamp-vti $(srcdir)/version.texi \
	$(top_srcdir)/configure AUTHORS COPYING ChangeLog INSTALL NEWS \
	TODO install-sh mdate-sh missing texinfo.tex
ACLOCAL_M4 = $(top_srcdir)/aclocal.m4
am__aclocal_m4_deps = $(top_srcdir)/configure.in
am__configure_deps = $(am__aclocal_m4_deps) $(CONFIGURE_DEPENDENCIES) \
	$(ACLOCAL_M4)
am__CONFIG_DISTCLEAN_FILES = config.status config.cache config.log \
 configure.lineno configure.status.lineno
mkinstalldirs = $(install_sh) -d
CONFIG_CLEAN_FILES =
depcomp =
am__depfiles_maybe =
SOURCES =
DIST_SOURCES =
INFO_DEPS = $(srcdir)/autobook.info
am__TEXINFO_TEX_DIR = $(srcdir)
DVIS = autobook.dvi
PDFS = autobook.pdf
PSS = autobook.ps
HTMLS = autobook.html
TEXINFOS = autobook.texi
MAKEINFOHTML = $(MAKEINFO) --html
AM_MAKEINFOHTMLFLAGS = $(AM_MAKEINFOFLAGS)
RECURSIVE_TARGETS = all-recursive check-recursive dvi-recursive \
	html-recursive info-recursive install-data-recursive \
	install-exec-recursive install-info-recursive \
	install-recursive installcheck-recursive installdirs-recursive \
	pdf-recursive ps-recursive uninstall-info-recursive \
	uninstall-recursive
am__installdirs = "$(DESTDIR)$(infodir)" "$(DESTDIR)$(docdir)"
am__vpath_adj_setup = srcdirstrip=`echo "$(srcdir)" | sed 's|.|.|g'`;
am__vpath_adj = case $$p in \
    $(srcdir)/*) f=`echo "$$p" | sed "s|^$$srcdirstrip/||"`;; \
    *) f=$$p;; \
  esac;
am__strip_dir = `echo $$p | sed -e 's|^.*/||'`;
docDATA_INSTALL = $(INSTALL_DATA)
DATA = $(doc_DATA)
ETAGS = etags
CTAGS = ctags
DIST_SUBDIRS = $(SUBDIRS)
DISTFILES = $(DIST_COMMON) $(DIST_SOURCES) $(TEXINFOS) $(EXTRA_DIST)
distdir = $(PACKAGE)-$(VERSION)
top_distdir = $(distdir)
am__remove_distdir = \
  { test ! -d $(distdir) \
    || { find $(distdir) -type d ! -perm -200 -exec chmod u+w {} ';' \
         && rm -fr $(distdir); }; }
DIST_ARCHIVES = $(distdir).tar.gz
GZIP_ENV = --best
distuninstallcheck_listfiles = find . -type f -print
distcleancheck_listfiles = find . -type f -print
ACLOCAL = ${SHELL} /home/joostvb/www/mdcc.cx/pub/autobook/autobook-1.4.4-unofficial/missing --run aclocal-1.9
AMTAR = ${SHELL} /home/joostvb/www/mdcc.cx/pub/autobook/autobook-1.4.4-unofficial/missing --run tar
AUTOCONF = ${SHELL} /home/joostvb/www/mdcc.cx/pub/autobook/autobook-1.4.4-unofficial/missing --run autoconf
AUTOHEADER = ${SHELL} /home/joostvb/www/mdcc.cx/pub/autobook/autobook-1.4.4-unofficial/missing --run autoheader
AUTOMAKE = ${SHELL} /home/joostvb/www/mdcc.cx/pub/autobook/autobook-1.4.4-unofficial/missing --run automake-1.9
AWK = gawk
CYGPATH_W = echo
DEFS = -DPACKAGE_NAME=\"\" -DPACKAGE_TARNAME=\"\" -DPACKAGE_VERSION=\"\" -DPACKAGE_STRING=\"\" -DPACKAGE_BUGREPORT=\"\" -DPACKAGE=\"autobook\" -DVERSION=\"1.4.4-unofficial\" 
ECHO_C = 
ECHO_N = -n
ECHO_T = 
INSTALL_DATA = ${INSTALL} -m 644
INSTALL_PROGRAM = ${INSTALL}
INSTALL_SCRIPT = ${INSTALL}
INSTALL_STRIP_PROGRAM = ${SHELL} $(install_sh) -c -s
LIBOBJS = 
LIBS = 
LTLIBOBJS = 
M4 = /usr/bin/m4
MAKEINFO = ${SHELL} /home/joostvb/www/mdcc.cx/pub/autobook/autobook-1.4.4-unofficial/missing --run makeinfo
PACKAGE = autobook
PACKAGE_BUGREPORT = 
PACKAGE_NAME = 
PACKAGE_STRING = 
PACKAGE_TARNAME = 
PACKAGE_VERSION = 
PATH_SEPARATOR = :
SET_MAKE = 
SHELL = /bin/sh
STRIP = 
VERSION = 1.4.4-unofficial
ac_ct_STRIP = 
am__leading_dot = .
am__tar = ${AMTAR} chof - "$$tardir"
am__untar = ${AMTAR} xf -
bindir = ${exec_prefix}/bin
build_alias = 
datadir = ${prefix}/share
exec_prefix = ${prefix}
host_alias = 
includedir = ${prefix}/include
infodir = ${prefix}/info
install_sh = /home/joostvb/www/mdcc.cx/pub/autobook/autobook-1.4.4-unofficial/install-sh
libdir = ${exec_prefix}/lib
libexecdir = ${exec_prefix}/libexec
localstatedir = ${prefix}/var
mandir = ${prefix}/man
mkdir_p = mkdir -p --
oldincludedir = /usr/include
prefix = /usr/local
program_transform_name = s,x,x,
sbindir = ${exec_prefix}/sbin
sharedstatedir = ${prefix}/com
sysconfdir = ${prefix}/etc
target_alias = 
AUTOMAKE_OPTIONS = gnu no-dependencies
SUBDIRS = examples . html
PERL = perl
TEXI2DVI = texi2dvi
TEXI2PDF = texi2pdf
DVIPS = dvips
INSTALLDOCS = autobook.ps autobook.pdf
MAINTAINERCLEANFILES = INSTALL Makefile.in aclocal.m4 \
			  configure install-sh mdate-sh missing \
			  mkinstalldirs texinfo.tex $(INSTALLDOCS)

MOSTLYCLEANFILES = autobook.dvi
CLEANFILES = autobook.fns autobook.ps autobook.pdf
info_TEXINFOS = autobook.texi
autobook_TEXINFOS = $(chapters) $(examples) $(parts) $(MENUS) appendices.texi AUTHORS COPYING PLATFORMS
EXTRA_DIST = autobook.m4 bootstrap $(parts) appendices.texi \
			  $(chapters) PLATFORMS STYLE texi2html \
			  stamp-vti split.pl

autobook_includes = version.texi AUTHORS PLATFORMS COPYING
BUILT_SOURCES = autobook.texi $(MENUS)
MENUS = $(srcdir)/part1.menu $(srcdir)/part2.menu $(srcdir)/part3.menu $(srcdir)/appendices.menu
SUFFIXES = .info .m4 .menu .ps .pdf .texi .texinfo .txi
docdir = $(datadir)/doc/$(PACKAGE)
doc_DATA = AUTHORS COPYING ChangeLog NEWS README TODO \
                          $(INSTALLDOCS)

parts = part1.texi part2.texi part3.texi
chapters = chapters/bootstrap.texi \
		chapters/complex-project.texi \
		chapters/cygwin.texi \
		chapters/dynamic-load.texi \
		chapters/foreword.texi \
		chapters/flow-diagrams.texi \
		chapters/intro-libtool.texi \
		chapters/large-project.texi \
		chapters/libltdl.texi \
		chapters/portable-sh.texi \
		chapters/preamble.texi \
		chapters/small-project.texi \
		chapters/using-libtool.texi

examples = \
  examples/cc-g.texi \
  examples/configure_1.texi \
  examples/convenience/configure.texi \
  examples/convenience/error_h.texi \
  examples/convenience/error.texi \
  examples/convenience/lib/Makefile.texi \
  examples/convenience/lib/source_h.texi \
  examples/convenience/lib/source.texi \
  examples/convenience/main.texi \
  examples/convenience/Makefile.texi \
  examples/convenience/replace/basename.texi \
  examples/convenience/replace/Makefile.texi \
  examples/foonly/Makefile.texi \
  examples/foonly/configure.texi \
  examples/hello/hello.texi \
  examples/hello/main.texi \
  examples/intro-hello/hello.texi \
  examples/intro-hello/main.texi \
  examples/intro-hello/trim.texi \
  examples/ltdl-loader.texi \
  examples/ltdl-module.texi \
  examples/openmode.texi \
  examples/reexec.texi \
  examples/rpl_fopen.texi \
  examples/sic-complex/modules/Makefile_1.texi \
  examples/sic-complex/modules/Makefile_2.texi \
  examples/sic-complex/modules/unknown_1.texi \
  examples/sic-complex/sic/common-h.texi \
  examples/sic-complex/sic/Makefile_1.texi \
  examples/sic-complex/sic/module_1.texi \
  examples/sic-complex/sic/module_2.texi \
  examples/sic-complex/sic/module_3.texi \
  examples/sic-complex/sic/module_4.texi \
  examples/sic-complex/sic/module_5.texi \
  examples/sic-complex/sic/module_h_1.texi \
  examples/sic-complex/src/sic_1.texi \
  examples/sic-complex/src/sic_2.texi \
  examples/sic-complex/src/sic_builtin_1.texi \
  examples/sic-complex/src/sic_builtin_2.texi \
  examples/sic-complex/src/sic_repl_1.texi \
  examples/sic-large/bootstrap.texi \
  examples/sic-large/configure_1.texi \
  examples/sic-large/configure_4.texi \
  examples/sic-large/configure_5.texi \
  examples/sic-large/doc/Makefile_1.texi \
  examples/sic-large/doc/Makefile_2.texi \
  examples/sic-large/doc/sic_1.texi \
  examples/sic-large/Makefile_1.texi \
  examples/sic-large/Makefile_2.texi \
  examples/sic-large/replace/Makefile_1.texi \
  examples/sic-large/sic/Makefile_1.texi \
  examples/sic-large/sic/Makefile_2.texi \
  examples/sic-large/tests/defs.texi \
  examples/sic-large/tests/incomplete_1.texi \
  examples/sic-large/tests/Makefile_1.texi \
  examples/sic-small/bootstrap.texi \
  examples/sic-small/config/readline.texi \
  examples/sic-small/config/sys_errlist.texi \
  examples/sic-small/replace/Makefile.texi \
  examples/sic-small/replace/strcspn_1.texi \
  examples/sic-small/sic/builtin_h_1.texi \
  examples/sic-small/sic/common_h_1.texi \
  examples/sic-small/sic/common_h_2.texi \
  examples/sic-small/sic/common_h_3.texi \
  examples/sic-small/sic/common_h_4.texi \
  examples/sic-small/sic/error_1.texi \
  examples/sic-small/sic/error_2.texi \
  examples/sic-small/sic/error_h_1.texi \
  examples/sic-small/sic/eval_h_1.texi \
  examples/sic-small/sic/list_1.texi \
  examples/sic-small/sic/list_h_1.texi \
  examples/sic-small/sic/sic_h_1.texi \
  examples/sic-small/sic/syntax_h_1.texi \
  examples/sic-small/sic/xmalloc_1.texi \
  examples/sic-small/src/sic_1.texi \
  examples/sic-small/src/sic_builtin_1.texi \
  examples/sic-small/src/sic_h_1.texi \
  examples/sic-small/src/sic_repl_1.texi \
  examples/sic-small/src/sic_syntax_1.texi \
  examples/simple-loader.texi \
  examples/simple-module.texi

M4FLAGS = -I$(srcdir) -P
all: $(BUILT_SOURCES)
	$(MAKE) $(AM_MAKEFLAGS) all-recursive

.SUFFIXES:
.SUFFIXES: .info .m4 .menu .ps .pdf .texi .texinfo .txi .dvi .html
am--refresh:
	@:
$(srcdir)/Makefile.in:  $(srcdir)/Makefile.am  $(am__configure_deps)
	@for dep in $?; do \
	  case '$(am__configure_deps)' in \
	    *$$dep*) \
	      echo ' cd $(srcdir) && $(AUTOMAKE) --gnu '; \
	      cd $(srcdir) && $(AUTOMAKE) --gnu  \
		&& exit 0; \
	      exit 1;; \
	  esac; \
	done; \
	echo ' cd $(top_srcdir) && $(AUTOMAKE) --gnu  Makefile'; \
	cd $(top_srcdir) && \
	  $(AUTOMAKE) --gnu  Makefile
.PRECIOUS: Makefile
Makefile: $(srcdir)/Makefile.in $(top_builddir)/config.status
	@case '$?' in \
	  *config.status*) \
	    echo ' $(SHELL) ./config.status'; \
	    $(SHELL) ./config.status;; \
	  *) \
	    echo ' cd $(top_builddir) && $(SHELL) ./config.status $@ $(am__depfiles_maybe)'; \
	    cd $(top_builddir) && $(SHELL) ./config.status $@ $(am__depfiles_maybe);; \
	esac;

$(top_builddir)/config.status: $(top_srcdir)/configure $(CONFIG_STATUS_DEPENDENCIES)
	$(SHELL) ./config.status --recheck

$(top_srcdir)/configure:  $(am__configure_deps)
	cd $(srcdir) && $(AUTOCONF)
$(ACLOCAL_M4):  $(am__aclocal_m4_deps)
	cd $(srcdir) && $(ACLOCAL) $(ACLOCAL_AMFLAGS)

.texi.info:
	restore=: && backupdir="$(am__leading_dot)am$$$$" && \
	am__cwd=`pwd` && cd $(srcdir) && \
	rm -rf $$backupdir && mkdir $$backupdir && \
	if ($(MAKEINFO) --version) >/dev/null 2>&1; then \
	  for f in $@ $@-[0-9] $@-[0-9][0-9] $(@:.info=).i[0-9] $(@:.info=).i[0-9][0-9]; do \
	    if test -f $$f; then mv $$f $$backupdir; restore=mv; else :; fi; \
	  done; \
	else :; fi && \
	cd "$$am__cwd"; \
	if $(MAKEINFO) $(AM_MAKEINFOFLAGS) $(MAKEINFOFLAGS) -I $(srcdir) \
	 -o $@ $<; \
	then \
	  rc=0; \
	  cd $(srcdir); \
	else \
	  rc=$$?; \
	  cd $(srcdir) && \
	  $$restore $$backupdir/* `echo "./$@" | sed 's|[^/]*$$||'`; \
	fi; \
	rm -rf $$backupdir; exit $$rc

.texi.dvi:
	TEXINPUTS="$(am__TEXINFO_TEX_DIR)$(PATH_SEPARATOR)$$TEXINPUTS" \
	MAKEINFO='$(MAKEINFO) $(AM_MAKEINFOFLAGS) $(MAKEINFOFLAGS) -I $(srcdir)' \
	$(TEXI2DVI) $<

.texi.html:
	rm -rf $(@:.html=.htp)
	if $(MAKEINFOHTML) $(AM_MAKEINFOHTMLFLAGS) $(MAKEINFOFLAGS) -I $(srcdir) \
	 -o $(@:.html=.htp) $<; \
	then \
	  rm -rf $@; \
	  if test ! -d $(@:.html=.htp) && test -d $(@:.html=); then \
	    mv $(@:.html=) $@; else mv $(@:.html=.htp) $@; fi; \
	else \
	  if test ! -d $(@:.html=.htp) && test -d $(@:.html=); then \
	    rm -rf $(@:.html=); else rm -Rf $(@:.html=.htp) $@; fi; \
	  exit 1; \
	fi
$(srcdir)/autobook.info: autobook.texi $(srcdir)/version.texi $(autobook_TEXINFOS)
autobook.dvi: autobook.texi $(srcdir)/version.texi $(autobook_TEXINFOS)
autobook.html: autobook.texi $(srcdir)/version.texi $(autobook_TEXINFOS)
$(srcdir)/version.texi:  $(srcdir)/stamp-vti
$(srcdir)/stamp-vti: autobook.texi $(top_srcdir)/configure
	@(dir=.; test -f ./autobook.texi || dir=$(srcdir); \
	set `$(SHELL) $(srcdir)/mdate-sh $$dir/autobook.texi`; \
	echo "@set UPDATED $$1 $$2 $$3"; \
	echo "@set UPDATED-MONTH $$2 $$3"; \
	echo "@set EDITION $(VERSION)"; \
	echo "@set VERSION $(VERSION)") > vti.tmp
	@cmp -s vti.tmp $(srcdir)/version.texi \
	  || (echo "Updating $(srcdir)/version.texi"; \
	      cp vti.tmp $(srcdir)/version.texi)
	-@rm -f vti.tmp
	@cp $(srcdir)/version.texi $@

mostlyclean-vti:
	-rm -f vti.tmp

maintainer-clean-vti:
	-rm -f $(srcdir)/stamp-vti $(srcdir)/version.texi
.dvi.ps:
	TEXINPUTS="$(am__TEXINFO_TEX_DIR)$(PATH_SEPARATOR)$$TEXINPUTS" \
	$(DVIPS) -o $@ $<

uninstall-info-am:
	@$(PRE_UNINSTALL)
	@if (install-info --version && \
	     install-info --version 2>&1 | sed 1q | grep -i -v debian) >/dev/null 2>&1; then \
	  list='$(INFO_DEPS)'; \
	  for file in $$list; do \
	    relfile=`echo "$$file" | sed 's|^.*/||'`; \
	    echo " install-info --info-dir='$(DESTDIR)$(infodir)' --remove '$(DESTDIR)$(infodir)/$$relfile'"; \
	    install-info --info-dir="$(DESTDIR)$(infodir)" --remove "$(DESTDIR)$(infodir)/$$relfile"; \
	  done; \
	else :; fi
	@$(NORMAL_UNINSTALL)
	@list='$(INFO_DEPS)'; \
	for file in $$list; do \
	  relfile=`echo "$$file" | sed 's|^.*/||'`; \
	  relfile_i=`echo "$$relfile" | sed 's|\.info$$||;s|$$|.i|'`; \
	  (if cd "$(DESTDIR)$(infodir)"; then \
	     echo " cd '$(DESTDIR)$(infodir)' && rm -f $$relfile $$relfile-[0-9] $$relfile-[0-9][0-9] $$relfile_i[0-9] $$relfile_i[0-9][0-9]"; \
	     rm -f $$relfile $$relfile-[0-9] $$relfile-[0-9][0-9] $$relfile_i[0-9] $$relfile_i[0-9][0-9]; \
	   else :; fi); \
	done

dist-info: $(INFO_DEPS)
	@srcdirstrip=`echo "$(srcdir)" | sed 's|.|.|g'`; \
	list='$(INFO_DEPS)'; \
	for base in $$list; do \
	  case $$base in \
	    $(srcdir)/*) base=`echo "$$base" | sed "s|^$$srcdirstrip/||"`;; \
	  esac; \
	  if test -f $$base; then d=.; else d=$(srcdir); fi; \
	  for file in $$d/$$base*; do \
	    relfile=`expr "$$file" : "$$d/\(.*\)"`; \
	    test -f $(distdir)/$$relfile || \
	      cp -p $$file $(distdir)/$$relfile; \
	  done; \
	done

mostlyclean-aminfo:
	-rm -rf autobook.aux autobook.cp autobook.cps autobook.fn autobook.ky \
	  autobook.kys autobook.log autobook.pg autobook.pgs \
	  autobook.tmp autobook.toc autobook.tp autobook.tps \
	  autobook.vr autobook.vrs autobook.dvi autobook.pdf \
	  autobook.ps autobook.html

maintainer-clean-aminfo:
	@list='$(INFO_DEPS)'; for i in $$list; do \
	  i_i=`echo "$$i" | sed 's|\.info$$||;s|$$|.i|'`; \
	  echo " rm -f $$i $$i-[0-9] $$i-[0-9][0-9] $$i_i[0-9] $$i_i[0-9][0-9]"; \
	  rm -f $$i $$i-[0-9] $$i-[0-9][0-9] $$i_i[0-9] $$i_i[0-9][0-9]; \
	done
install-docDATA: $(doc_DATA)
	@$(NORMAL_INSTALL)
	test -z "$(docdir)" || $(mkdir_p) "$(DESTDIR)$(docdir)"
	@list='$(doc_DATA)'; for p in $$list; do \
	  if test -f "$$p"; then d=; else d="$(srcdir)/"; fi; \
	  f=$(am__strip_dir) \
	  echo " $(docDATA_INSTALL) '$$d$$p' '$(DESTDIR)$(docdir)/$$f'"; \
	  $(docDATA_INSTALL) "$$d$$p" "$(DESTDIR)$(docdir)/$$f"; \
	done

uninstall-docDATA:
	@$(NORMAL_UNINSTALL)
	@list='$(doc_DATA)'; for p in $$list; do \
	  f=$(am__strip_dir) \
	  echo " rm -f '$(DESTDIR)$(docdir)/$$f'"; \
	  rm -f "$(DESTDIR)$(docdir)/$$f"; \
	done

# This directory's subdirectories are mostly independent; you can cd
# into them and run `make' without going through this Makefile.
# To change the values of `make' variables: instead of editing Makefiles,
# (1) if the variable is set in `config.status', edit `config.status'
#     (which will cause the Makefiles to be regenerated when you run `make');
# (2) otherwise, pass the desired values on the `make' command line.
$(RECURSIVE_TARGETS):
	@failcom='exit 1'; \
	for f in x $$MAKEFLAGS; do \
	  case $$f in \
	    *=* | --[!k]*);; \
	    *k*) failcom='fail=yes';; \
	  esac; \
	done; \
	dot_seen=no; \
	target=`echo $@ | sed s/-recursive//`; \
	list='$(SUBDIRS)'; for subdir in $$list; do \
	  echo "Making $$target in $$subdir"; \
	  if test "$$subdir" = "."; then \
	    dot_seen=yes; \
	    local_target="$$target-am"; \
	  else \
	    local_target="$$target"; \
	  fi; \
	  (cd $$subdir && $(MAKE) $(AM_MAKEFLAGS) $$local_target) \
	  || eval $$failcom; \
	done; \
	if test "$$dot_seen" = "no"; then \
	  $(MAKE) $(AM_MAKEFLAGS) "$$target-am" || exit 1; \
	fi; test -z "$$fail"

mostlyclean-recursive clean-recursive distclean-recursive \
maintainer-clean-recursive:
	@failcom='exit 1'; \
	for f in x $$MAKEFLAGS; do \
	  case $$f in \
	    *=* | --[!k]*);; \
	    *k*) failcom='fail=yes';; \
	  esac; \
	done; \
	dot_seen=no; \
	case "$@" in \
	  distclean-* | maintainer-clean-*) list='$(DIST_SUBDIRS)' ;; \
	  *) list='$(SUBDIRS)' ;; \
	esac; \
	rev=''; for subdir in $$list; do \
	  if test "$$subdir" = "."; then :; else \
	    rev="$$subdir $$rev"; \
	  fi; \
	done; \
	rev="$$rev ."; \
	target=`echo $@ | sed s/-recursive//`; \
	for subdir in $$rev; do \
	  echo "Making $$target in $$subdir"; \
	  if test "$$subdir" = "."; then \
	    local_target="$$target-am"; \
	  else \
	    local_target="$$target"; \
	  fi; \
	  (cd $$subdir && $(MAKE) $(AM_MAKEFLAGS) $$local_target) \
	  || eval $$failcom; \
	done && test -z "$$fail"
tags-recursive:
	list='$(SUBDIRS)'; for subdir in $$list; do \
	  test "$$subdir" = . || (cd $$subdir && $(MAKE) $(AM_MAKEFLAGS) tags); \
	done
ctags-recursive:
	list='$(SUBDIRS)'; for subdir in $$list; do \
	  test "$$subdir" = . || (cd $$subdir && $(MAKE) $(AM_MAKEFLAGS) ctags); \
	done

ID: $(HEADERS) $(SOURCES) $(LISP) $(TAGS_FILES)
	list='$(SOURCES) $(HEADERS) $(LISP) $(TAGS_FILES)'; \
	unique=`for i in $$list; do \
	    if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \
	  done | \
	  $(AWK) '    { files[$$0] = 1; } \
	       END { for (i in files) print i; }'`; \
	mkid -fID $$unique
tags: TAGS

TAGS: tags-recursive $(HEADERS) $(SOURCES)  $(TAGS_DEPENDENCIES) \
		$(TAGS_FILES) $(LISP)
	tags=; \
	here=`pwd`; \
	if ($(ETAGS) --etags-include --version) >/dev/null 2>&1; then \
	  include_option=--etags-include; \
	  empty_fix=.; \
	else \
	  include_option=--include; \
	  empty_fix=; \
	fi; \
	list='$(SUBDIRS)'; for subdir in $$list; do \
	  if test "$$subdir" = .; then :; else \
	    test ! -f $$subdir/TAGS || \
	      tags="$$tags $$include_option=$$here/$$subdir/TAGS"; \
	  fi; \
	done; \
	list='$(SOURCES) $(HEADERS)  $(LISP) $(TAGS_FILES)'; \
	unique=`for i in $$list; do \
	    if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \
	  done | \
	  $(AWK) '    { files[$$0] = 1; } \
	       END { for (i in files) print i; }'`; \
	if test -z "$(ETAGS_ARGS)$$tags$$unique"; then :; else \
	  test -n "$$unique" || unique=$$empty_fix; \
	  $(ETAGS) $(ETAGSFLAGS) $(AM_ETAGSFLAGS) $(ETAGS_ARGS) \
	    $$tags $$unique; \
	fi
ctags: CTAGS
CTAGS: ctags-recursive $(HEADERS) $(SOURCES)  $(TAGS_DEPENDENCIES) \
		$(TAGS_FILES) $(LISP)
	tags=; \
	here=`pwd`; \
	list='$(SOURCES) $(HEADERS)  $(LISP) $(TAGS_FILES)'; \
	unique=`for i in $$list; do \
	    if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \
	  done | \
	  $(AWK) '    { files[$$0] = 1; } \
	       END { for (i in files) print i; }'`; \
	test -z "$(CTAGS_ARGS)$$tags$$unique" \
	  || $(CTAGS) $(CTAGSFLAGS) $(AM_CTAGSFLAGS) $(CTAGS_ARGS) \
	     $$tags $$unique

GTAGS:
	here=`$(am__cd) $(top_builddir) && pwd` \
	  && cd $(top_srcdir) \
	  && gtags -i $(GTAGS_ARGS) $$here

distclean-tags:
	-rm -f TAGS ID GTAGS GRTAGS GSYMS GPATH tags

distdir: $(DISTFILES)
	$(am__remove_distdir)
	mkdir $(distdir)
	$(mkdir_p) $(distdir)/chapters $(distdir)/examples $(distdir)/examples/convenience $(distdir)/examples/convenience/lib $(distdir)/examples/convenience/replace $(distdir)/examples/foonly $(distdir)/examples/hello $(distdir)/examples/intro-hello $(distdir)/examples/sic-complex/modules $(distdir)/examples/sic-complex/sic $(distdir)/examples/sic-complex/src $(distdir)/examples/sic-large $(distdir)/examples/sic-large/doc $(distdir)/examples/sic-large/replace $(distdir)/examples/sic-large/sic $(distdir)/examples/sic-large/tests $(distdir)/examples/sic-small $(distdir)/examples/sic-small/config $(distdir)/examples/sic-small/replace $(distdir)/examples/sic-small/sic $(distdir)/examples/sic-small/src
	@srcdirstrip=`echo "$(srcdir)" | sed 's|.|.|g'`; \
	topsrcdirstrip=`echo "$(top_srcdir)" | sed 's|.|.|g'`; \
	list='$(DISTFILES)'; for file in $$list; do \
	  case $$file in \
	    $(srcdir)/*) file=`echo "$$file" | sed "s|^$$srcdirstrip/||"`;; \
	    $(top_srcdir)/*) file=`echo "$$file" | sed "s|^$$topsrcdirstrip/|$(top_builddir)/|"`;; \
	  esac; \
	  if test -f $$file || test -d $$file; then d=.; else d=$(srcdir); fi; \
	  dir=`echo "$$file" | sed -e 's,/[^/]*$$,,'`; \
	  if test "$$dir" != "$$file" && test "$$dir" != "."; then \
	    dir="/$$dir"; \
	    $(mkdir_p) "$(distdir)$$dir"; \
	  else \
	    dir=''; \
	  fi; \
	  if test -d $$d/$$file; then \
	    if test -d $(srcdir)/$$file && test $$d != $(srcdir); then \
	      cp -pR $(srcdir)/$$file $(distdir)$$dir || exit 1; \
	    fi; \
	    cp -pR $$d/$$file $(distdir)$$dir || exit 1; \
	  else \
	    test -f $(distdir)/$$file \
	    || cp -p $$d/$$file $(distdir)/$$file \
	    || exit 1; \
	  fi; \
	done
	list='$(DIST_SUBDIRS)'; for subdir in $$list; do \
	  if test "$$subdir" = .; then :; else \
	    test -d "$(distdir)/$$subdir" \
	    || $(mkdir_p) "$(distdir)/$$subdir" \
	    || exit 1; \
	    distdir=`$(am__cd) $(distdir) && pwd`; \
	    top_distdir=`$(am__cd) $(top_distdir) && pwd`; \
	    (cd $$subdir && \
	      $(MAKE) $(AM_MAKEFLAGS) \
	        top_distdir="$$top_distdir" \
	        distdir="$$distdir/$$subdir" \
	        distdir) \
	      || exit 1; \
	  fi; \
	done
	$(MAKE) $(AM_MAKEFLAGS) \
	  top_distdir="$(top_distdir)" distdir="$(distdir)" \
	  dist-info
	-find $(distdir) -type d ! -perm -777 -exec chmod a+rwx {} \; -o \
	  ! -type d ! -perm -444 -links 1 -exec chmod a+r {} \; -o \
	  ! -type d ! -perm -400 -exec chmod a+r {} \; -o \
	  ! -type d ! -perm -444 -exec $(SHELL) $(install_sh) -c -m a+r {} {} \; \
	|| chmod -R a+r $(distdir)
dist-gzip: distdir
	tardir=$(distdir) && $(am__tar) | GZIP=$(GZIP_ENV) gzip -c >$(distdir).tar.gz
	$(am__remove_distdir)

dist-bzip2: distdir
	tardir=$(distdir) && $(am__tar) | bzip2 -9 -c >$(distdir).tar.bz2
	$(am__remove_distdir)

dist-tarZ: distdir
	tardir=$(distdir) && $(am__tar) | compress -c >$(distdir).tar.Z
	$(am__remove_distdir)

dist-shar: distdir
	shar $(distdir) | GZIP=$(GZIP_ENV) gzip -c >$(distdir).shar.gz
	$(am__remove_distdir)

dist-zip: distdir
	-rm -f $(distdir).zip
	zip -rq $(distdir).zip $(distdir)
	$(am__remove_distdir)

dist dist-all: distdir
	tardir=$(distdir) && $(am__tar) | GZIP=$(GZIP_ENV) gzip -c >$(distdir).tar.gz
	$(am__remove_distdir)

# This target untars the dist file and tries a VPATH configuration.  Then
# it guarantees that the distribution is self-contained by making another
# tarfile.
distcheck: dist
	case '$(DIST_ARCHIVES)' in \
	*.tar.gz*) \
	  GZIP=$(GZIP_ENV) gunzip -c $(distdir).tar.gz | $(am__untar) ;;\
	*.tar.bz2*) \
	  bunzip2 -c $(distdir).tar.bz2 | $(am__untar) ;;\
	*.tar.Z*) \
	  uncompress -c $(distdir).tar.Z | $(am__untar) ;;\
	*.shar.gz*) \
	  GZIP=$(GZIP_ENV) gunzip -c $(distdir).shar.gz | unshar ;;\
	*.zip*) \
	  unzip $(distdir).zip ;;\
	esac
	chmod -R a-w $(distdir); chmod a+w $(distdir)
	mkdir $(distdir)/_build
	mkdir $(distdir)/_inst
	chmod a-w $(distdir)
	dc_install_base=`$(am__cd) $(distdir)/_inst && pwd | sed -e 's,^[^:\\/]:[\\/],/,'` \
	  && dc_destdir="$${TMPDIR-/tmp}/am-dc-$$$$/" \
	  && cd $(distdir)/_build \
	  && ../configure --srcdir=.. --prefix="$$dc_install_base" \
	    $(DISTCHECK_CONFIGURE_FLAGS) \
	  && $(MAKE) $(AM_MAKEFLAGS) \
	  && $(MAKE) $(AM_MAKEFLAGS) dvi \
	  && $(MAKE) $(AM_MAKEFLAGS) check \
	  && $(MAKE) $(AM_MAKEFLAGS) install \
	  && $(MAKE) $(AM_MAKEFLAGS) installcheck \
	  && $(MAKE) $(AM_MAKEFLAGS) uninstall \
	  && $(MAKE) $(AM_MAKEFLAGS) distuninstallcheck_dir="$$dc_install_base" \
	        distuninstallcheck \
	  && chmod -R a-w "$$dc_install_base" \
	  && ({ \
	       (cd ../.. && umask 077 && mkdir "$$dc_destdir") \
	       && $(MAKE) $(AM_MAKEFLAGS) DESTDIR="$$dc_destdir" install \
	       && $(MAKE) $(AM_MAKEFLAGS) DESTDIR="$$dc_destdir" uninstall \
	       && $(MAKE) $(AM_MAKEFLAGS) DESTDIR="$$dc_destdir" \
	            distuninstallcheck_dir="$$dc_destdir" distuninstallcheck; \
	      } || { rm -rf "$$dc_destdir"; exit 1; }) \
	  && rm -rf "$$dc_destdir" \
	  && $(MAKE) $(AM_MAKEFLAGS) dist \
	  && rm -rf $(DIST_ARCHIVES) \
	  && $(MAKE) $(AM_MAKEFLAGS) distcleancheck
	$(am__remove_distdir)
	@(echo "$(distdir) archives ready for distribution: "; \
	  list='$(DIST_ARCHIVES)'; for i in $$list; do echo $$i; done) | \
	  sed -e '1{h;s/./=/g;p;x;}' -e '$${p;x;}'
distuninstallcheck:
	@cd $(distuninstallcheck_dir) \
	&& test `$(distuninstallcheck_listfiles) | wc -l` -le 1 \
	   || { echo "ERROR: files left after uninstall:" ; \
	        if test -n "$(DESTDIR)"; then \
	          echo "  (check DESTDIR support)"; \
	        fi ; \
	        $(distuninstallcheck_listfiles) ; \
	        exit 1; } >&2
distcleancheck: distclean
	@if test '$(srcdir)' = . ; then \
	  echo "ERROR: distcleancheck can only run from a VPATH build" ; \
	  exit 1 ; \
	fi
	@test `$(distcleancheck_listfiles) | wc -l` -eq 0 \
	  || { echo "ERROR: files left in build directory after distclean:" ; \
	       $(distcleancheck_listfiles) ; \
	       exit 1; } >&2
check-am: all-am
check: $(BUILT_SOURCES)
	$(MAKE) $(AM_MAKEFLAGS) check-recursive
all-am: Makefile $(INFO_DEPS) $(DATA)
installdirs: installdirs-recursive
installdirs-am:
	for dir in "$(DESTDIR)$(infodir)" "$(DESTDIR)$(docdir)"; do \
	  test -z "$$dir" || $(mkdir_p) "$$dir"; \
	done
install: $(BUILT_SOURCES)
	$(MAKE) $(AM_MAKEFLAGS) install-recursive
install-exec: install-exec-recursive
install-data: install-data-recursive
uninstall: uninstall-recursive

install-am: all-am
	@$(MAKE) $(AM_MAKEFLAGS) install-exec-am install-data-am

installcheck: installcheck-recursive
install-strip:
	$(MAKE) $(AM_MAKEFLAGS) INSTALL_PROGRAM="$(INSTALL_STRIP_PROGRAM)" \
	  install_sh_PROGRAM="$(INSTALL_STRIP_PROGRAM)" INSTALL_STRIP_FLAG=-s \
	  `test -z '$(STRIP)' || \
	    echo "INSTALL_PROGRAM_ENV=STRIPPROG='$(STRIP)'"` install
mostlyclean-generic:
	-test -z "$(MOSTLYCLEANFILES)" || rm -f $(MOSTLYCLEANFILES)

clean-generic:
	-test -z "$(CLEANFILES)" || rm -f $(CLEANFILES)

distclean-generic:
	-test -z "$(CONFIG_CLEAN_FILES)" || rm -f $(CONFIG_CLEAN_FILES)

maintainer-clean-generic:
	@echo "This command is intended for maintainers to use"
	@echo "it deletes files that may require special tools to rebuild."
	-test -z "$(BUILT_SOURCES)" || rm -f $(BUILT_SOURCES)
	-test -z "$(MAINTAINERCLEANFILES)" || rm -f $(MAINTAINERCLEANFILES)
clean: clean-recursive

clean-am: clean-generic mostlyclean-am

distclean: distclean-recursive
	-rm -f $(am__CONFIG_DISTCLEAN_FILES)
	-rm -f Makefile
distclean-am: clean-am distclean-generic distclean-tags

dvi: dvi-recursive

dvi-am: $(DVIS)

html: html-recursive

html-am: $(HTMLS)

info: info-recursive

info-am: $(INFO_DEPS)

install-data-am: install-docDATA install-info-am

install-exec-am:

install-info: install-info-recursive

install-info-am: $(INFO_DEPS)
	@$(NORMAL_INSTALL)
	test -z "$(infodir)" || $(mkdir_p) "$(DESTDIR)$(infodir)"
	@srcdirstrip=`echo "$(srcdir)" | sed 's|.|.|g'`; \
	list='$(INFO_DEPS)'; \
	for file in $$list; do \
	  case $$file in \
	    $(srcdir)/*) file=`echo "$$file" | sed "s|^$$srcdirstrip/||"`;; \
	  esac; \
	  if test -f $$file; then d=.; else d=$(srcdir); fi; \
	  file_i=`echo "$$file" | sed 's|\.info$$||;s|$$|.i|'`; \
	  for ifile in $$d/$$file $$d/$$file-[0-9] $$d/$$file-[0-9][0-9] \
                       $$d/$$file_i[0-9] $$d/$$file_i[0-9][0-9] ; do \
	    if test -f $$ifile; then \
	      relfile=`echo "$$ifile" | sed 's|^.*/||'`; \
	      echo " $(INSTALL_DATA) '$$ifile' '$(DESTDIR)$(infodir)/$$relfile'"; \
	      $(INSTALL_DATA) "$$ifile" "$(DESTDIR)$(infodir)/$$relfile"; \
	    else : ; fi; \
	  done; \
	done
	@$(POST_INSTALL)
	@if (install-info --version && \
	     install-info --version 2>&1 | sed 1q | grep -i -v debian) >/dev/null 2>&1; then \
	  list='$(INFO_DEPS)'; \
	  for file in $$list; do \
	    relfile=`echo "$$file" | sed 's|^.*/||'`; \
	    echo " install-info --info-dir='$(DESTDIR)$(infodir)' '$(DESTDIR)$(infodir)/$$relfile'";\
	    install-info --info-dir="$(DESTDIR)$(infodir)" "$(DESTDIR)$(infodir)/$$relfile" || :;\
	  done; \
	else : ; fi
install-man:

installcheck-am:

maintainer-clean: maintainer-clean-recursive
	-rm -f $(am__CONFIG_DISTCLEAN_FILES)
	-rm -rf $(top_srcdir)/autom4te.cache
	-rm -f Makefile
maintainer-clean-am: distclean-am maintainer-clean-aminfo \
	maintainer-clean-generic maintainer-clean-vti

mostlyclean: mostlyclean-recursive

mostlyclean-am: mostlyclean-aminfo mostlyclean-generic mostlyclean-vti

pdf: pdf-recursive

pdf-am: $(PDFS)

ps: ps-recursive

ps-am: $(PSS)

uninstall-am: uninstall-docDATA uninstall-info-am

uninstall-info: uninstall-info-recursive

.PHONY: $(RECURSIVE_TARGETS) CTAGS GTAGS all all-am am--refresh check \
	check-am clean clean-generic clean-recursive ctags \
	ctags-recursive dist dist-all dist-bzip2 dist-gzip dist-info \
	dist-shar dist-tarZ dist-zip distcheck distclean \
	distclean-generic distclean-recursive distclean-tags \
	distcleancheck distdir distuninstallcheck dvi dvi-am html \
	html-am info info-am install install-am install-data \
	install-data-am install-docDATA install-exec install-exec-am \
	install-info install-info-am install-man install-strip \
	installcheck installcheck-am installdirs installdirs-am \
	maintainer-clean maintainer-clean-aminfo \
	maintainer-clean-generic maintainer-clean-recursive \
	maintainer-clean-vti mostlyclean mostlyclean-aminfo \
	mostlyclean-generic mostlyclean-recursive mostlyclean-vti pdf \
	pdf-am ps ps-am tags tags-recursive uninstall uninstall-am \
	uninstall-docDATA uninstall-info-am


.m4.texi:
	cd $(top_builddir) && \
	  $(M4) $(M4FLAGS) `echo $< | sed 's,.*/,,'` > $@

%.menu: $(srcdir)/%.texi
	@echo 'm4_dnl DO NOT EDIT -- automatically generated from $<' > $@
	sed '1,/^@c %\*\*start of menu/d;/^@c %\*\*end of menu/,$$d' $(srcdir)/$< >> $@

.texi.ps:
	$(TEXI2DVI) -I $(srcdir) $<
	$(DVIPS) -f < $*.dvi > $@

.texi.pdf:
	$(TEXI2PDF) -I $(srcdir) $<

all: $(INSTALLDOCS)

# depends on examples too
autobook.texi: autobook.m4 $(MENUS) $(chapters)

# make sure all @include stuff is there
# once autobook.texi is needed
autobook.ps: autobook.texi $(autobook_includes)
autobook.pdf: autobook.texi $(autobook_includes)

macro-list:
	$(PERL) $(srcdir)/split.pl `find $(srcdir) -name '*.texi' -print` \
	  > $(srcdir)/macro-list
# Tell versions [3.59,3.63) of GNU make to not export all variables.
# Otherwise a system limit (for SysV at least) may be exceeded.
.NOEXPORT: